Chemical spray cabins structure consists of 304 Cr-Ni stainless steel panels. Water curtain, water tank and filtration tank is made from 2mm, upper section tank is made from 1.5 mm 304 Cr-Ni stainless steel tank.
With this system chemicals are sucked in to the water curtain. The chemicals and permanganate particles that escape to the water curtain are caught by the washing nozzles. The nozzles can be placed and removed when necessary to be cleaned. Upper hall and nozzles can be controlled by two separate valves. The water sucked from the water tank below has two filter systems. With this two filter systems, the waste is prevented from going to the pump. The water used in this system is discharged with a water discharge valve. Chemical particles are caught in the water curtain, nozzles and filtration in the cabin. On the upper side of the water curtain there is a suction fan located. With this suction system any bad smell is removed. The electric panel is located on the cabin and has the necessary thermal and contactor protection. The lighting is waterproof armature. Cabin dimensions can change according to the robot numbers. ( i.e. 1-2-3-4-5-6 etc.)